How to order

1. There are two ways to search and find the product you require:

a. Use the vehicle manufacturer Category search on the left hand side of the Home Page. Click on the manufacturer of your vehicle and you will see a selection of units categorised by vehicle make & model.

Click on details and you can cross check the part  number/reference against any other make and the original part number of the vehicle
in question.

Check engine specification, vehicle specification and any ancillary products you may also require in order to fit the part in question.

Check engine specification, vehicle specification and any ancillary products you may also require in order to fit the part in question.

Ancillary items refers to items such as Pressure Pipes which we recommend should also be purchased if your unit requires them. Please note - we will not guarantee a unit if fitted with old/existing pressure pipes

b. If you know the part number of the unit you require you can also use our Product Search facility which will search the stock system by part number and manufacturer.
This will display all the units in the defined category and the required unit can then be found through the product detail category
Please note – all part numbers on the web site are for reference purposes only and we take no responsibility for any inaccuracies or mis-selection. It is your responsibility to cross check all the references and pictorial content on the site to ensure you are ordering the correct part for your vehicle

2.

Once you have located the correct unit and you have satisfied yourself it meets all the necessary criteria, click on ‘Buy’ and the selected product will drop into your Shopping Cart.
Click here to check what happens here if the product selected is not in stock?
 

3. A Fitting Kit will be supplied FOC with your order. If for any reason you damage or lose the original Fitting Kit we will make a charge for any replacement
 
4. Continue Shopping if you require more than one product using the search method as described in 1 or 2
 
5. At this stage if you do not already have one, you will be asked to create an account. If you already have any account with us you can go to the ‘log in’ page via the ‘log in’ short cut
 
6. To create an account please complete all the required detail which will allow us to service your order efficiently.
 
7. Don’t forget to read the Terms & Conditions of Sale the link for which can be found at the bottom of the page under ‘Terms & Conditions’ and once read please tick the box that states you have read and understand those Terms & Conditions.
 
8. You will also have to read the Fitting Instructions (see pdf Flow Fitting Chart DF Web) for the items you wish to purchase and tick the box that states you have read and understand those instructions. It is important you understand the fitting process as any unit that is fitted or incorrectly selected and fitted will result in your Warranty being invalidated. So ensure you a) diagnose the fault correctly and establish you are ordering the part you require and b) fit the product according to the Fitting Instructions or make arrangements for someone to fit it that can. Fitting Instructions can be found on the Fitting Instructions page.
 
9. Once you have checked order and you are happy with the products you have selected, read the Terms & Conditions and Fitting Instructions proceed to Delivery to establish the Delivery charges which will be itemised.
 
10. Proceed to Payment and use your Credit or Debit Card to pay via our secure GlobalPay system.
 
11. Once payment is accepted the Order process is complete and you will receive an automated E Mail to your E Mail address to confirm receipt of the order and the anticipated delivery.